Many generator projects need more than power cables. Remote start, alarm contacts, ATS signals, monitoring points, and emergency stop circuits should be defined before panel drawings are approved.
What buyers should know first
Control cable scope is a coordination item. The generator supplier can prepare terminals and signals, while the site contractor usually handles cable laying and final connection to building or plant systems.
In practice
For factories, hospitals, and data center support loads, buyers should ask Yangzhou Tesla Power Equipment Co., Ltd. to list available controller signals and any optional modules needed for the diesel generator set.
| Item to confirm | Why it matters | What to send with the RFQ |
|---|---|---|
| Remote start signal | Defines how the generator receives the start command | ATS or BMS output type, voltage-free contact requirement |
| Alarm contacts | Supports site monitoring and fault response | Required common alarm, running, fault, low fuel, or emergency stop points |
| Cable route | Prevents missing glands, terminals, or panel space | Cable entry side, distance, and installation responsibility |
Before requesting a quotation
Share the load list, voltage and frequency, installation location, duty rating, enclosure requirement, control interface, and any consultant drawings. Yangzhou Tesla Power Equipment Co., Ltd. can then check the diesel generator set scope against the project assumptions instead of quoting from a single kW or kVA number.
- List every required signal instead of asking for general monitoring.
- Confirm whether signals are dry contacts, powered outputs, or communication points.
- Ask for the terminal drawing before panel production when the project has a consultant.
- Check emergency stop and fire shutdown responsibility with the local electrical designer.
Related product and project pages
For a matching equipment reference, review <a href="https://www.tesladieselgeneratorset.com/products/factory-direct-sale-customized-500kw-630kva-for-cummins-ktaa19-g6a-diesel-generator-ats-auto-start-50-60hz-frequency-230v-240v-r/">this diesel generator set product page</a>. For wider project planning, compare it with <a href="https://www.tesladieselgeneratorset.com/">this technical guide</a> before sending the RFQ.
Common questions
Are signal terminals included in a standard generator panel?
Basic signals may be available, but the exact terminal list should be confirmed for each project.
Can the generator connect to a BMS?
Often yes, but the signal type, protocol, optional module, and wiring responsibility must be defined.
Who lays the control cable on site?
The site contractor usually lays external cables unless the contract states a packaged installation scope.
What should be attached to the RFQ?
Attach the ATS requirement, BMS point list, emergency stop requirement, and any consultant terminal schedule.