Buying Cummins generator sets wholesale means container-load volumes, model-level pricing and a factory pre-shipment inspection before the sets ship out.
Wholesale Cummins generator set buying is a container business, not a shelf business. Tesla Power starts every wholesale inquiry by locking a model and power rating, agreeing Incoterms and a pre-shipment inspection, then consolidating one 40ft shipment rather than a few crates.
- Container-load minimums replace single-unit pricing for wholesale Cummins orders.
- Approved power ratings run from 100 kVA up to 1500 kVA for bulk Cummins sets.
- A pre-shipment inspection and factory acceptance test confirm each set before it ships.
- Incoterms decide who pays freight and insurance on the container.
Contents
- What wholesale means for a Cummins order
- How many Cummins sets fit in one 40ft container
- Which Cummins power ratings suit bulk buyers
- What documents confirm a wholesale shipment
- How a Cummins set is inspected before shipping
- What drives the cost of a wholesale quote
- Which Cummins models bulk buyers specify
- How sets are secured and declared for ocean freight
- Where wholesale buyers get a quotation
What does wholesale mean for a Cummins generator set order?
A wholesale Cummins sale is a full 40ft container of identical or mixed models consolidated at the factory and booked as one shipment, while a retail sale is one set sent by parcel or LCL. The buyer chooses the power ratings, enclosure types and trade terms before production starts, and negotiates lead time and payment milestones up front rather than discovering them later.
The minimum order quantity is the break point: most Cummins wholesale programs open at a partial or full 40ft container rather than a single unit, because factory loading and export paperwork cost the same for one set or twenty. Buyers needing two or three sets pay near-retail or join a consolidated shipment run by the supplier. The trade-off of container volume is early commitment.
How many Cummins sets fit inside one 40ft container?
A 40ft high-cube dry container is the standard shipping unit for wholesale generator orders because its internal dimensions of 12,032 mm long, 2,350 mm wide and 2,697 mm high to the load line give 76 m3 of volume under an ISO 45G1 type code. The container maximum gross weight is 32,500 kg, its tare about 3,880 kg and its maximum payload 28,620 kg, so the steel box leaves roughly 28.6 tonnes for cargo. The door opening is the tightest constraint at 2,340 mm wide and 2,577 mm high, which is 120 mm lower than the internal height, so any set whose packed height exceeds 2,577 mm cannot pass through the doors. These figures are verified container specifications, not estimates, and they govern every load plan. A buyer should confirm the actual tare on the container data plate before booking, because the 3,880 kg figure is the design value for a standard dry box and a heavier floor lining shifts the usable payload.
The fit is a floor-and-weight calculation for the C110 D5 enclosed (3,151 x 1,142 x 1,714 mm, 2,274 kg wet). Its floor plan yields 3 x 2 = 6 sets per layer totalling 13,644 kg, under the 28,620 kg payload; a second layer would exceed the 2,697 mm height, so the load stays single-layer.
| Configuration | Rating | Open dims (mm) | Wet weight (kg) | Sets per 40ft HC |
|---|---|---|---|---|
| Cummins C110 D5, enclosed | 100 / 110 kVA | 3,151 x 1,142 x 1,714 | 2,274 | 6 |
| Cummins C275 D5, open | 250 / 275 kVA | 3,086 x 1,360 x 2,018 | 3,357 | 3 |
| Cummins C500 D5, open | 500 kVA | 3,686 x 1,160 x 2,266 | 4,053 | 6 |
| Cummins C1000 D5, open | 1000 kVA | 4,302 x 1,702 x 2,139 | 6,520 | 2 |
The table above is a floor- and weight-limited estimate; counts shift with crate thickness and the 2,340 mm door opening. A C1000 D5 open set (4,302 mm, 6,520 kg wet) uses 13,040 kg of the 28,620 kg payload; every model shares the 12,032 x 2,350 mm footprint inside a 32,500 kg box.

Which Cummins power ratings suit bulk buyers?
Bulk Cummins orders cluster on approved ratings with deep component supply and fast production. The smallest practical tier is the Cummins 20 kW / 25 kVA (0.8 pf) platform for residential standby. The workhorses are 100 kVA and 150 kVA class sets for construction backup, and 250 kVA class sets for factories. Large projects buy 500 kVA, 1000 kVA and 1500 kVA class sets.
Each rating maps to a Cummins model and a prime or standby figure on the datasheet. Tesla Power stocks the C110 D5 at 100 kVA prime / 110 kVA standby, the C275 D5 at 250 kVA prime / 275 kVA standby, and the C500 D5 at 500 kVA standby. At the top, the 1000 kVA class and the 1500 kVA / 1200 kW (0.8 pf) class cover data centers and utility backup. Buyers should match the rating to the site load with headroom.
The approved Cummins segments the factory stocks for container orders are listed on the product page:
- 20 kW Cummins diesel generator set
- 250 kVA Cummins diesel generator set
- 500 kW / 630 kVA (0.8 pf) Cummins KTA19 generator set
- 1000 kVA Cummins KTA38 generator set
- 1500 kVA / 1200 kW (0.8 pf) Cummins QSK38 generator set
What documents confirm a wholesale Cummins shipment?
The standards that govern a wholesale Cummins order are the ISO 8528 family, and the test report should reference them by clause; the full texts are maintained by ISO. ISO 8528-1:2018 defines the rating terms prime power and standby power that appear on every datasheet, and it is currently under revision. ISO 8528-5:2025, published in May 2025, replaced the 2022 edition and covers generating performance and acceptance tests. ISO 8528-6:2023 sets the test methods for alternating-current generating sets. A buyer who requests the ISO 8528-5:2025 test report therefore receives a like-for-like output measurement regardless of the supplier brand. These three standards mean a 100 kVA set and a 1500 kVA set are measured the same way, which is the only sound basis for comparing quotes because the ISO 8528-1 revision keeps prime and standby definitions stable and a buyer who cites the same clause removes a supplier’s room to redefine a rating.
A complete shipment travels with a commercial invoice, a packing list, a bill of lading and a certificate of origin, and the buyer should confirm which the price includes. The packing list names every set and serial number. Tesla Power includes the test report tied to ISO 8528-5:2025 on every shipment, and its absence on a cheap quote is a red flag.
How is a Cummins generator set inspected before shipping?
Tesla Power pairs a visual check of the canopy, nameplate and wiring with a factory acceptance test that loads each Cummins set and records voltage, frequency and the load-step response. The inspector verifies the packing list against the units and photographs the loaded container. When the buyer requires it, a third-party surveyor issues the report so the result is independent of the manufacturer record.

The acceptance test proves the rating paid for: a 100 kVA prime set is loaded to its prime output, while a 500 kVA standby set is checked against its standby figure. The report shows the load bank result, frequency stability and any alarms, not just a pass mark. Skipping this on a shipment of twenty or more units is a poor bet.
What actually drives the cost of a wholesale Cummins quote?
Tesla Power prices the alternator, radiator and base fuel tank as the parts that scale with rating, so a 1500 kVA class set costs far more than a 100 kVA set. Silent and container enclosures add fabrication and acoustic material, and CE marking or an emissions tier adds testing. Two quotes at the same kVA can differ sharply on options alone.
Freight and trade terms are the second layer buyers underestimate. A container from a Yangtze-Delta factory to Northern Europe ran about US$4,000 to US$4,400 per 40ft box in September 2026, a spot price separate from the ex-works price. Incoterms decide whether the quote includes freight and insurance, so a low ex-works number grows once the buyer owns the cargo at the Chinese port.
Which Cummins models do bulk buyers specify most?
Cummins open-frame sets load easiest because their low height fits several per layer, while enclosed sets trade floor for quiet. Tesla Power supplies the C110 D5 open at 2,268 x 1,094 x 1,576 mm and 1,574 kg wet, growing to 3,151 mm and 2,274 kg wet enclosed. The C275 D5 open is 3,086 mm and 3,357 kg wet; the C500 D5 open reaches 3,686 mm and 4,053 kg wet.
Contractors order the C110 D5 and C275 D5 in volume for distributed sites, while data centers order the C500 D5, the 1000 kVA class and the 1500 kVA class as fewer larger units. The 1000 kVA class open set is 4,302 mm and 6,520 kg wet, so it loads two per container. A buyer mixing ratings balances floor against payload; the Tesla Power planning team keeps the 2,340 mm door from binding.
How are generator sets secured and declared for ocean freight?
Generator sets are secured for ocean freight under the CTU Code, the IMO, ILO and UNECE guidelines for packing cargo transport units, and the lashing must hold the units through pitch and roll. The lashing eyes on a flat-rack or container are commonly rated at 5,000 kg and are the weakest link, with the maximum securing load set at 50 percent of the breaking load. The CTU Code treats each 5,000 kg eye as the rating point, so the actual restraint is half the chain’s certified break strength. Metal sets sit on wood dunnage or rubber anti-slip material against the container floor, and the cargo center of gravity must not sit far off-center or the stack shifts in a seaway. These restraint rules are verified container-loading practice, not optional, and every factory shipment follows them.

Declaration accuracy matters: a wrong dimension is out-of-gauge and the carrier can refuse to load. Maersk caps a 40ft flat-rack in-gauge at 34,500 kg payload, while a misdeclaration carries about USD 500 plus handling. The 2,340 mm door width and 2,577 mm door height are hard limits, so a 2,600 mm tall set travels on a flat-rack rather than inside a standard box.
Where do wholesale buyers get a Cummins quotation?
Yangzhou Tesla Power returns a wholesale Cummins quotation after the buyer sends the target ratings, enclosures, voltage and destination, and the factory negotiates Incoterms and the inspection before production. The fastest path is to confirm the approved segment from the product list and request a container-load quote rather than a per-set price, because the two are structured differently. Buyers wanting mixed ratings should say so up front.
For buyers comparing suppliers, the advice section carries the standard references and the inspection checklist a wholesale order should meet. The next step is to lock one container of approved ratings, agree ISO 8528-5:2025 testing and book on Incoterms that match who controls the cargo. The export team at the contact page names the standards, the test report and the freight terms in writing.
What is the minimum order quantity for wholesale Cummins generator sets?
The minimum order quantity for a wholesale Cummins order is normally a partial or full 40ft container rather than a single unit, because loading and export paperwork cost the same for one set or twenty. Buyers needing two or three sets pay near-retail or join a consolidated shipment. A full high-cube carries about 28,620 kg of payload.
Do wholesale Cummins quotes include ocean freight?
A wholesale Cummins quote does not include ocean freight unless the Incoterms say so. Under EXW or FOB the buyer pays the ocean leg; under CIF or CFR the seller does. The September 2026 spot rate for a 40ft box from China to Northern Europe was about US$4,000 to US$4,400, separate from the ex-works price.
How long does a container order of Cummins sets take to deliver?
A container order typically takes four to eight weeks from confirmed spec to arrival, across production, testing and transit. Standard ratings such as 100 kVA or 250 kVA build faster than a customized 1500 kVA set. The inspection and ISO 8528-5:2025 test add a few days, and buyers add destination clearance time.
Can I mix different Cummins models in one container?
Yes, you can mix models in one container if the combined weight stays under the 28,620 kg payload and each set clears the 2,340 mm door width and 2,577 mm door height. A 1000 kVA class set loads two per container while a 100 kVA class set loads six, so the factory balances floor against payload.
Are Cummins generator sets certified for export?
Sets can be supplied with the certifications a destination requires, but the buyer must name them at order time because each adds testing and paperwork. Common needs are CE marking, emissions tiers and a certificate of origin. The ISO 8528-5:2025 test is the baseline performance proof.
What Incoterms apply to wholesale generator set orders?
The Incoterms are normally EXW, FOB, CIF or CFR and decide who pays freight, insurance and handling. Under FOB the seller delivers alongside the vessel; under CIF the seller pays freight and insurance. A low ex-works price under EXW shifts all shipping risk to the buyer.
How is quality verified before the container ships?
Quality is verified through a pre-shipment inspection paired with a factory acceptance test that loads each set and records voltage, frequency and the load-step response. A third-party surveyor can issue an independent report so the result does not rest solely on the manufacturer record.
Can I arrange a third-party factory inspection?
Yes, name a third-party inspection in the contract before production; most buyers do for container volumes. The surveyor attends the acceptance test, verifies the sets against the packing list and issues a report tied to ISO 8528-5:2025, giving proof before the vessel sails.
Published by the Yangzhou Tesla Power export team, which prepares the packing list, the ISO 8528-5:2025 test report and the loaded-container photos for every wholesale Cummins container order.
